Hyundai Main Control Valve 31N6-10110-manufacture,factory,supplier from China

Engine Spare Parts：Cylinder block /Cylinder head/Fuel pump /Injection pump /Water Pump/Oil pump/Priming pump/Turbocharger /Alternator/Air compressor/Controller/SensorBelt/Injector/Wiring harness/Crankshaft/Camshaft/Thermostat/Starting motor/Piston /Piston ring/Piston pin/Liner/Connecting rod/Main metal/Connecting rod metal/Thrust metal/Flywheel housing/Fan/Gasket kit /Hydraulic spare partsHydraulic pump/Cylinder block+ plate valve/Retainer shoe/Cradle assy/Shaft/Solenoid valve/Gear pump/Fan pump/Fan motor/Swing motor/Boom/Boom cylinder/Arm /Arm cylinder/Piston sub/Guide retainer/Spring/Relief

Automotive injector failure can occur due to various reasons that impact the performance and reliability of the vehicle. Some common causes of automotive injector failure include the use of unqualified or contaminated oil, damage to the sensor coil, wear of the internal structure of the injector, failure of the electronic control module, leakage from the injector or clogging of the nozzle, improper fuel pressure (either too high or too low), and loose or damaged connections to the injector.When faced with automotive injector failure, it is crucial to address the issue promptly.

Construction projects heavily rely on reliable and high-quality machinery for optimal performance. Here, we highlight some leading brands known for their exceptional construction equipment:American Brands: Caterpillar, John Deere, Bobcat, and Terex. These brands are synonymous with durability and innovation in the construction industry.Japanese Brands: Komatsu, Hitachi, Kobelco, and Sumitomo. Renowned for their advanced technology and reliability, these brands offer a wide range of construction machinery solutions.Korean Brands: Daewoo, Hyundai, and Doosan.

Injector troubleshooting methods1. Few or no oil injected by the injector.2. Injector injection pressure is too low.3. Injector injection pressure is too high4. Leakage of fuel injector injectors5. Poor atomization of fuel injector injection6, Injector injection into the line7, Injector needle valve surface burned or blue-black color. Note: (diesel engine overheating) check the cooling system, and pay attention to the replacement of coupling parts.

Check whether the diesel pump pump body oil leakage: check whether the diesel pump seals (gaskets, oil seals, etc.) is damaged or aging, if there is damage or aging need to replace the relevant parts in a timely manner.Check whether the parts of the diesel pump are worn: open the diesel pump, carefully check the surface of the pump parts with or without obvious wear, if there is wear parts need to be replaced in a timely manner and to ensure that the installation is correct.Replace the diesel pump seals: disassemble the diesel fuel, open the pump body, find the aging hardened seals and replace

Recently, the Novokuznetsk Mining and Coal Exhibition was held in Novokuznetsk, Russia, from June 4 to 7. As a leading company focusing on the field of machinery parts, Jining Huida Construction Machinery Co., Ltd. was honored to attend the exhibition on behalf of Chinese suppliers. In this event, we have demonstrated the excellent quality and innovative strength of Made in China with impressive achievements, which has won more praise for our company in the global market!The exhibition venue exhibition area of 55,000 square meters, nearly 30,000 visitors, as many as 600 exhibitors and brands.

Why is it difficult to start an excavator in winter? It is not only determined by its own technical condition, but also by the outside temperature.

On January 6, 2024, Jining Huida Construction Machinery Co., Ltd. held a grand 2023 annual summary and 2024 kick-off meeting at Mehood Hotel in Jining City.All colleagues of Huida Machinery gathered together to summarize and reflect on 2023, which is full of tension, fulfillment and growth. Mr.

Jining Huida company is equipped with a first-class spare parts warehouse in order to ensure fast delivery, located in the industrial area of our city. It has a fluid space for storing and managing various goods and items. The interior of the warehouse features tall shelves and lockers for easy and efficient organization and classification of items.Our warehouse has also set up dedicated areas for handling and packing goods.

The primary differences between Komatsu original (OEM) filters and aftermarket filters lie in their quality, performance, and cost.Quality and Materials: OEM filters are made by Komatsu or approved manufacturers, ensuring they meet the company's strict design and quality standards. They are built to last and offer optimal filtration capabilities, protecting sensitive machinery parts like engines and hydraulic systems.